WEN 6502 Disc Sander Review
WEN 6502 has 4.3 amp and ½ HP motor that would prevent the machine from shutting down while doing heavy loads. It has a 4 x 36 inch belt, and anyone could change its sand paper. You can also tilt its belts on any angle from 0 to 90 degrees depending on the work you have to do. It’s also built with a cast iron base to prevent too much vibration from ruining your work. It has a 6-inch disk on the sides to give the users the ability to sand anything they want to. It also has a durable table you can use for working which is made from cast-aluminum.
WEN 6502 Disc Sander
Pros
- The WEN Belt Disc Sander has the advantages of a belt and disc sander.
- It has a dust extraction port built in to collect particles that comes from your project.
- You can use this sander in different materials such as plastic, aluminum, wood, and others.
- Having a two in one product allows multiple usage, if you have to work with a coarse grit you can use the disc and if you need a finer one, you can use the finer one.
Cons
- The disc and belt sander is basically a sander.
- There’s a different speed if you compare it to a real grinder.
- You cannot use it on metal.
- If you use this sander, you should only use half the disc or else you could put yourself in danger.
- It doesn’t have enough HP for projects that are bigger and the HP gives the power of a tool to remove pieces of materials.
- They compromised the quality for the low price, so the torque is less than expected.
- The disc and belt combo should be guarded, so if you use the disc, the guard should be covered up and vice versa.
- Unit that have a guard system are known to cause safety injuries.
This tool is packed with an 80-grit belt as well as an 80 grit disc that has a mitre gauge to keep the piece steady as you sand some angled edges.To make things extra safe and controllable they added extra stop bar. To make it a bit dust free it comes with a 2.25 inch built-in dust port where you connect the dust extractor. Every product manufactured by WEN comes with a 2 year warranty. Their technicians who are skilled will be at your service whenever you need their help.
Features:
Long blade guard
It comes with a longer blade guard that would lead the excess sawdust into the spout that collects it. it makes sure that unwanted objects are prevented from getting trapped into your belt because there are possibilities for fingers or hair to get into it without the guard.
Cast Iron Blade for sturdiness
Its base is built heavy and sturdy with cast iron to prevent the tool from shaking, wobbling, or basically moving around. Some people also suggest you cement this tool in one place for better operation.
Belt that’s adjustable
You can rotate the belt from a horizontal to a vertical position. You can rotate it the way your project requires it to be positioned.
Dust collector port
Have you ever felt so tired from completing your project just to realize there are thousands of sawdust you have to clean up? This tool prevents that from happening because it has a dust port that’s attached to an external dust collector to make sure there’s less dusts and debris to clean up after working.
Large table and Miter Gauge
There’s a large supporting table that comes with the disc, it can bevel 0-56 degrees and it comes with a miter gauge you can detach.
Conclusion
This combination has a lot of pros and cons which could or could not be worth it depending on the project you are aiming to do. Just keep in mind that the utmost care must be taken whenever using tools. With this tool, you should remember to keep your hands away from the disc and you need to make sure that the guard is on the tool properly.
Leave a Reply